|
Shear Blades and Machine Knives find application in all
types of industries dealing with
steel/ non ferrous alloys, cellulose, fiber boards, paper and plastic etc.
Following parameters are of prime importance to Blades and Knives.
a. Hardness
b. Compression Strength
c. Wear Resistance
d. Long Cutting Life
e. Toughness
f. Shock Resistance
g. Close Tolerance
While selecting the most appropriate combination of the above parameters,
the manufacture
of shear blades and shear knives needs to know the following details regarding the material
to be sheared.
1. The type of material i.e. whether it is ferrous or non ferrous.
2. The thickness of material.
3. The temperature of the material whether it is to be sheared hot or at
room
temperature.
4. Type of service continuous or intermittent.
5. The metallurgical properties of material including its tensile strength,
ultimate and
yield strength.
These details are extremely important to select suitable raw material and
heat treatment
process to achieve perfect combination of all the seven required qualities
of shear
blades and knives.
Shear Blades are essentially made out of various types of alloy steels and
each type of
alloy steel has its own characteristic dimensional changes in the heat
treatment.
Dee Tee manufacturers wide range of
Shear Blades and machine Knives.
CROP SHEARS, FLYING SHEARS, CHIPPER KNIVES, COLD SHEAR BLADES PAPER
CUTTING KNIVES, BAR SHEARS, SCRAP CHOPPERS, WARING PLATES, HOT SHEAR BLADES,
BOW TYPE SHEAR BLADES,FLAT SHEAR KNIVES, HORIZONTAL SHEAR KNIVES,STRAIGHT
SHEAR BLADES, ETC. CONTACT US FOR QUOTES
Raw material before taking in to process should be tested in respect of
chemical
composition, metallographic analysis and ultrasonic testing. And in the
final stage of
inspection, blades & knives should be thoroughly checked in respect of
hardness and
dimensional accuracy.
OTHER ARTICLES
NON
DESTRUCTIVE TESTING OF COLD ROLLING MILL ROLLS
SUB ZERO
TREATMENT (Reduction in Retained Austenite)
TUBE CUT OFF KNIVES
TIGHTER
MANUFACTURING TOLERANCE FOR ROTARY
CUTTER,
SLITTING KNIFE AND SPACER.
CRYOGENIC
TREATMENT
HINTS & TIPS ON THE APPLICATION OF
SLITTER TOOLING
GUIDELINES
FOR RAW MATERIAL SELECTION FOR SLITTING LINE TOOLING
PRECAUTION & ORDERING
TIPS FOR FRICTION SAWS
FINS AN IMPORTANT
COMPONENT OF TUBE MAKING
IMPORTANT FACTORS
IN COLD ROLLING MILL ROLLS
DEE TEE FORGES YET AHEAD IN SEARCH OF
EXCELLENCE
SLITTER TOOLING OVER ARM
SEPARATORS |
